Assembly Instruction

MIMIC CUBE
Made in China - r04 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 A) Fit dowels of left side frame into corresponding
holes of crossbars as shown. Using a screwdriver, turn
each cam clockwise until it securely engages each cam
screw.
B) Fit dowels of left side frame into corresponding holes
of bottom panel as shown. Secure all cams.
4 Position assembled unit upright as shown. Carefully
place glass top into assembled unit as shown. Make
sure glass top is fully secured by frame.
Assembly is now complete.
B
crossbar
bottom
panel
crossbar
left side frame
3 Fit dowels of right side frame into corresponding
holes of assembled unit as shown. Secure all cams.
right side frame
NOTE: Make sure crossbars
face in during assembly
as shown
glass top
frame
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
A