Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Meridian Round Coffee Table

ASSEMBLY

COMPONENTS

1 - tabletop

Made in Vietnam - r03 Page 1 of 2

Thank you for purchasing the Meridian Round Coffee

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

MERIDIAN ROUND COFFEE TABLE

1 - hex wrench

(included)

HARDWARE

TOOLS REQUIRED

8 -acorn

nuts

24 - washers

Missing hardware?

Please call 800. 606. 6387 for replacements.

1 - center

connector

4 - legs

1 - allen wrench

(included)

1 - center

hole cap

1 With the assistance of another adult, place tabletop

upside down on a clean, padded surface. Loosely

attach each leg by inserting the hardware through each

of the 2 holes and the tabletop frame as shown. Do not

fully tighten the bolts.

NOTE: Do not fully

tighten the bolts

until directed

8 - long

bolts

8 - short

bolts

washer

acorn nut

washer

large bolt

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
MERIDIAN ROUND COFFEE TABLE HARDWARE 24 - washers 8 -acorn nuts 8 - short bolts 8 - long bolts Missing hardware? Please call 800. 606. 6387 for replacements. COMPONENTS 4 - legs Thank you for purchasing the Meridian Round Coffee Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
MERIDIAN ROUND COFFEE TABLE center connecter 2 Align holes in center connector with holes in legs. Loosely attach center connector to each leg as illustrated. At this point, fully tighten all the bolts installed in steps 1-2 with the allen wrench and hex wrench provided. center hole cap 3 With the assistance of another adult, place the table upright. If not using an umbrella, conceal hole in the tabletop with the center hole cap. Assembly is now complete.