Assembly Instruction

Made in Vietnam - r02 Page 2 of 2
MERIDIAN 96” RECTANGULAR DINING TABLE
2 Align holes in center connector with holes in legs.
Loosely attach center connector to each leg as illustrated.
At this point, fully tighten all the bolts installed in steps 1-2
with the allen wrench and hex wrench provided.
3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole in
the tabletop with the center hole cap.
Assembly is now complete.
center connecter
washer
small bolt
Customer Service 800.967.6696 | www.crateandbarrel.com
center hole cap
CLEANING & CARE
Clean surfaces with a dry or
damp soft cloth. Do not use
abrasive cleaners. It is recom-
mended to cover if left outdoors
for the winter..