Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Meridian 96" Rectangular Dining Table

ASSEMBLY

COMPONENTS

1 - tabletop

Made in Vietnam - r02 Page 1 of 2

Thank you for purchasing the Meridian 96” Rectangu-

lar Dining Table. This page lists all the contents

included in the box. Please take time to identify the

hardware as well as the individual components of this

product. As you unpack and prepare for assembly,

place the contents on a carpeted or padded area to

protect them from damage.

Note: 2 people are required to safely assemble this product.

MERIDIAN 96” RECTANGULAR DINING TABLE

1 - hex wrench

(included)

HARDWARE

TOOLS REQUIRED

16 -acorn

nuts

56 - washers 16 - long

bolts

Missing hardware?

Please call 800. 606. 6387 for replacements.

1 - center

connector

8 - legs

1 - allen wrench

(included)

1 With the assistance of another adult, place tabletop

upside down on a clean, padded surface. Loosely

attach each leg by inserting the hardware through each

of the 2 holes and the tabletop frame as shown. Do not

fully tighten the bolts.

1 - center

hole cap

NOTE: Do not fully

tighten the bolts

until directed

washer

large bolt

washer

acorn

nut

24 - short

bolts

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
MERIDIAN 96” RECTANGULAR DINING TABLE HARDWARE 56 - washers 16 -acorn nuts 24 - short bolts 16 - long bolts Missing hardware? Please call 800. 606. 6387 for replacements. COMPONENTS 1 - center hole cap Thank you for purchasing the Meridian 96” Rectangular Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
MERIDIAN 96” RECTANGULAR DINING TABLE center connecter washer small bolt 2 Align holes in center connector with holes in legs. Loosely attach center connector to each leg as illustrated. At this point, fully tighten all the bolts installed in steps 1-2 with the allen wrench and hex wrench provided. center hole cap CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. It is recommended to cover if left outdoors for the winter..