Assembly Instruction

Made in Vietnam - r01 Page 2 of 2
MERIDIAN 48” ROUND DINING TABLE
2 Align holes in center connector with holes in legs.
Loosely attach center connector to each leg as illustrated.
At this point, fully tighten all the bolts installed in steps 1-2
with the allen wrench and hex wrench provided.
3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole in
the tabletop with the center hole cap.
Assembly is now complete.
center connecter
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. It is recommended to cover if
left outdoors for the winter.
center hole cap