Assembly Instruction

Made in Vietnam - r03 Page 2 of 2
MERIDIAN CAFÉ TABLE
2 Align holes in center connector with corresponding
holes in legs. Loosely attach center connector to each
leg with 3 small bolts and 3 flat washers as shown.
At this point, fully tighten large/small bolts with an allen
wrench and acorn nuts with a hex wrench. Do not over
tighten the bolts.
3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole in
the tabletop with the center hole cap.
Assembly is now complete.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
center hole cap
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. If
necessary, clean with a soft bristle brush or microfiber
cloth. Do not use abrasive cleaners. Cover the unit if left
outdoors for the winter.
center
connector
small bolt
flat washer