Assembly Instruction

Made in Indonesia - r03
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
MENDOCINO WORKBAR
Page 2 of 3
A
B
back frame
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Periodically tighten bolts as necessary. We recommend the use of outdoor furniture
covers during inclement weather.
1 A) With the assistance of another adult, place back frame onto a clean, padded surface. Loosely attach 3 large
shelves to back frame with 6 large bolts and 6 screws as shown. Do not tighten bolts or screws.
B) Loosely attach 2 small shelves to back frame with 4 large bolts and 4 small bolts as shown. Do not tighten the bolts
C) Fit threaded bolts of 2 legs into corresponding holes of 3 large shelves as shown. Secure each leg with 3 washers and
3 nuts. At this point, fully tighten all bolts using an allen wrench, all screws using a phillips head screwdriver and all
nuts using a hex wrench. Do not over tighten the bolts, screws or nuts. With the assistance of another adult, position
assembled unit upright.
Assembly is now complete.
ASSEMBLY
A
large shelf
small shelf
large shelf
large shelf
small shelf
leg
leg
threaded bolt
washer
nut
screw
small bolt
large bolt
B
B
large bolt
A
A
C
C
B