Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in Indonesia - r01 Page 1 of 1
Thank you for purchasing the Mendocino Rectangular
Dining Table. This page lists all the contents included
in the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
MENDOCINO RECTANGULAR DINING TABLE
8 - washers 8 - nuts
nut
1 - umbrella
cap
NOTE: Do not over
tighten the nuts
4 - legs1 - tabletop
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Periodically tighten bolts as necessary.
A
B
washer
A
1 A) With the assistance of another adult, place
tabletop onto a clean, padded surface. Fit
threaded bolts of 4 legs into corresponding holes
of tabletop. Secure each leg to tabletop with 2
washers and 2 nuts, using a hex wrench. Do not
over tighten the nuts.
threaded
bolt
B) Position assembled unit upright. Fit
umbrella cap into center hole of
tabletop as shown.
Assembly is now complete.
center hole
umbrella
cap
tabletop
leg
Missing hardware? Please call
800.606.6387 for replacements.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
hex wrench
(included)