Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Indonesia - r02 Page 1 of 2

1 Fit crossbar into right leg frame as shown. Secure

crossbar to right leg frame with 1 medium bolt using

an allen wrench. Do not over tighten bolt.

Thank you for purchasing the Mendocino Bench. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

MENDOCINO BENCH

3 - large

bolts

4 - medium

bolts

2 - metal

dowels

1 - seat back

6 - wood

plugs

1 - seat

2 - leg frames

(1 left, 1 right)

1 - crossbar

right leg

frame

crossbar

2 - small

bolts

1 - screw

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

allen wrench

(included)

phillips head screwdriver

(not included)

(We recommend the use of hand tools instead of power tools)

PAGE 1
MENDOCINO BENCH HARDWARE Missing hardware? Please call 800.606.6387 for replacements. 3 - large bolts 4 - medium bolts 6 - wood plugs 1 - screw 2 - small bolts 2 - metal dowels TOOLS REQUIRED Thank you for purchasing the Mendocino Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
MENDOCINO BENCH A E seat back A right leg frame B D A B C C left leg frame seat frame 2 A) Fit 1 metal dowel into right leg frame as shown. B) Fit metal dowel of right leg frame into corresponding hole of seat frame. Secure seat frame with 1 medium bolt as shown. NOTE: Do not over tighten the screw 3 A) Fit seat back into assembled unit. Secure seat back to right leg frame with 1 small bolt using an allen wrench. B) Insert 1 metal dowel into seat frame as shown.