Assembly Instruction

MADISON WINE TOWER
Made in China r02 Page 2 of 3
2 A) Place left side panel onto padded surface.
Attach middle and bottom shelves onto side panels
with 2 bolts, 2 spring washers, and 2 bolts per shelf.
Secure with an Allen wrench, but do not over tighten.
Make sure drawer glide on middle panel runs
perpendicular to side panel as shown.
B) Slide top shelf into grooves on left side panel as
shown.
3 Insert back panel into long groove on back leg of
side panel as shown.
A
bottom shelf
top shelf
NOTE: Do not over
tighten the bolts.
Make sure drawer glide
on middle panel runs
perpendicular to side
panel.
A
B
A
B
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Customer Service 800.967.6696 | www.crateandbarrel.com
4 Insert assembled wine dividers into assembled unit
as shown. Make sure the sticker labeled, “BOTTOM,”
faces downwards and towards the back of unit.
5 A) Fit right side panel onto assembled unit as
shown.
B) Secure shelf panels with 2 bolts, 2 spring
washers, and 2 flat washers per shelf. Fully tighten
bolts using an Allen wrench.