Assembly Instruction

MADISON SMALL BUFFET
6
A) Insert 4 cams into 2 side panels and 1 middle
partition. Make sure arrows on each cam point
towards the short end of each panel.
B) Attach 2 case hinges to 2 side panels and 1 middle
partition with 2 small screws per hinge. Secure all screws
with a phillips head screwdriver.
7
A) Insert 6 wood dowels into 2 side panels and 1
middle partition. Press firmly to secure.
B) Fit 2 side panels and 1 middle partition onto cam
screws and bottom panel. Using a phillips head
screwdriver, turn bottom 6 cams 180º clockwise to
secure panels as illustrated above.
A) Slide large and small back panels into grooves at
rear of side panels and middle partition.
B) Slide panel connector between 2 small back
panels.
8
Made in Denmark - r07
Page 3 of 5
A
B
A
B
5
A) Position assembled unit upright. Insert 6 cam screws
to the bottom panel as illustrated. Secure with a phillips
head screwdriver.
B) Attach 6 cam screws and 2 plastic brackets to the
underside of top panel. Set top panel aside.
A
A
B
Top
Panel
Side
Panel
Side
Panel
Middle
Partition
Make sure
case hinges
face inwards