Assembly Instruction

MADISON SMALL BUFFET

A. Insert 1 cam screw per leg and tighten with a

phillips head screwdriver.

B. Insert 2 wood dowels into the ends of each long

apron.

C. Insert 2 cams into the face of each long apron.

Make sure the arrow on each cam points to the

closest short end of the the apron.

A. Fit 1 leg on the end of each long apron, aligning

dowels and cam screws with corresponding holes.

B. Secure legs by turning each cam 180º clockwise

with a phillips head screwdriver.

Repeat assembly method in Steps 1 and 2 for the

attachment of the 2 short aprons, using 4 wood

dowels, 2 cam screws, and 2 cams per apron.

Secure all cams with a phillips head screwdriver.

A) Align pre-drilled holes on apron with pre-drilled

holes on bottom panel. Insert 8 large screws

through front, back and side aprons into bottom

panel as shown. Secure each screw with a phillips

head screwdriver.

C) Using a hammer, gently tap in 1 glide onto the

bottom of each leg.

Made in Denmark - r07

Page 2 of 5