MADISON SMALL BUFFET HARDWARE 4 - glides 6 - case hinges Thank you for purchasing the Madison Small Buffet. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
MADISON SMALL BUFFET B A A C B 1 A. Insert 1 cam screw per leg and tighten with a phillips head screwdriver. B. Insert 2 wood dowels into the ends of each long apron. C. Insert 2 cams into the face of each long apron. Make sure the arrow on each cam points to the closest short end of the the apron. 2 A. Fit 1 leg on the end of each long apron, aligning dowels and cam screws with corresponding holes. B. Secure legs by turning each cam 180ยบ clockwise with a phillips head screwdriver.
MADISON SMALL BUFFET Top Panel Side Panel Middle Partition Side Panel 5 A) Position assembled unit upright. Insert 6 cam screws to the bottom panel as illustrated. Secure with a phillips head screwdriver. B) Attach 6 cam screws and 2 plastic brackets to the underside of top panel. Set top panel aside. B A 6 A) Insert 4 cams into 2 side panels and 1 middle partition. Make sure arrows on each cam point towards the short end of each panel.
MADISON SMALL BUFFET 9 Carefully position top panel over assembled unit. Align cam screws and wood dowels with corresponding holes in the top and side panels. Make sure the top panel brackets face the front of the assembled unit. 10 Position 4 support wedges onto the back edges of the assembled unit as shown. Secure each support wedge with 1 small screw. A B B 11 A) Attach 2 door hinges to 3 door panels with 2 small screws per hinge. Secure all screws with a phillips head screwdriver.
MADISON SMALL BUFFET 13 Position 1 large shelf and 1 small shelf onto shelf pegs in assembled unit. 14 Attach 3 door pulls to 3 door panels with 2 small screws per door. Using a Phillips head screwdriver, turn screws clockwise to secure. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 15 Attach 12 cam covers onto cams, as illustrated above. Press firmly to secure.
MADISON SMALL HUTCH ASSEMBLY HARDWARE 28 - wood 8 - cam dowels screws 6 - large screws Thank you for purchasing the Madison Small Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
MADISON SMALL HUTCH NOTE: Make sure arrows on each cam point towards nearest edge with holes A bottom back panel A B left and right side panels B bottom panel 1 A) Insert 4 cam screws and 3 wood dowels into left and right side panels as shown. Secure cam screws with a phillips head screwdriver. B) Position each hinge plate over corresponding holes in side panels. Secure hinges with pre-attached bolts, using a screwdriver. 2 A) Insert 4 cams and 4 wood dowels into bottom back panel as shown.
MADISON SMALL HUTCH B partition BACK VIEW OF ASSEMBLED UNIT A felt 5 A) Adhere felt along bottom edge of assembled unit as shown. B) Fit dowels of partitions into corresponding holes of assembled unit as shown. 6 Secure bottom panel to assembled unit with 4 connecting bolts as shown, using an allen wrench. top panel small back panel large back panel small back panel BACK VIEW OF ASSEMBLED UNIT 7 Slide 2 small back panels and 1 large back panel through grooves of assembled unit as shown.
MADISON SMALL HUTCH small adjustable shelf large adjustable shelf A A B small adjustable shelf 9 Secure top panel to assembled unit with 8 connecting bolts as shown. 10 A) Insert 12 shelf pins at desired shelf heights as shown. B) Place 2 small adjustable shelves and 1 large adjustable shelf into assembled unit. Make sure each shelf is securely supported by shelf pins. door front door front A C B 11 A) Attach 2 hinges to each door front with 2 small screws per hinge as shown.
MADISON SMALL HUTCH BACK VIEW OF ASSEMBLED UNITS 13 With the assistance of another adult, carefully place hutch on top of buffet as shown. Attach 3 connecting brackets to back of hutch/buffet assembly with 2 large screws per bracket as shown. Secure screws with a screwdriver. Assembly is now complete. hutch buffet (sold separately) HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
MADISON SMALL HUTCH SIDE VIEW cabinet screw flat washer wall wall strap flat washer wall anchor appropriate to wall type wall screw appropriate to wall type NOTE: Insert screws 3/4"-1" from the edge of the strap WALL MOUNTING ASSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors made for your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
