Assembly Instruction

MADISON LARGE BUFFET
6
A) Insert 4 cams into 2 side panels and 2 middle
partitions. Make sure arrows on each cam point
towards the short end of each panel.
B) Attach 2 case hinges to 2 side panels and 2
middle partitions with 2 small screws per hinge.
Secure all screws with a phillips head screwdriver.
7
A) Insert 6 wood dowels into 2 side panels and 2
middle partitions. Press firmly to secure.
B) Fit 2 side panels and 2 middle partitions onto
cam screws and bottom panel. Make sure case
hinges on side panels and middle partitions face
inwards as shown. Using a phillips head screwdriver,
secure bottom 8 cams.
8
Made in Denmark R03
Page 3 of 6
5
A) Position assembled unit upright. Insert 8 cam
screws to the bottom panel as illustrated. Secure
with a phillips head screwdriver.
B) Attach 8 cam screws and 3 door stops to the
underside of top panel. Set top panel aside.
Top
Panel
A
B
A
B
Side
Panel
Side
Panel
Middle
Partition
Middle
Partition
A
B
Make sure
case hinges
face inwards
Customer Service 800.967.6696 | www.crateandbarrel.com
A) Attach metal disk to leg assembly with 3 medium
screws as shown. Secure with Phillips head
screwdriver.
B) Attach support leg into assembly as shown. Turn
leg clockwise to secure.
A
B
A
B
C
C) Gently tap 1 glide into bottom of the support
leg with a hammer.