Assembly Instruction

MADISON LARGE BUFFET
1
A. Insert 1 cam screw per leg and tighten with a
phillips head screwdriver.
B. Insert 2 wood dowels into the ends of each long
apron.
C. Insert 2 cams into the face of each long apron.
Make sure the arrow on each cam points to the
closest short end of the the apron.
2
A. Fit 1 leg on the end of each long apron, aligning
dowels and cam screws with corresponding holes.
B. Secure legs by turning each cam clockwise with a
phillips head screwdriver until each cam securely
engages each cam screw.
3
Repeat assembly method in Steps 1 and 2 for the
attachment of the 2 short aprons, using 4 wood
dowels, 2 cam screws, and 2 cams per apron.
Secure all cams with a phillips head screwdriver.
4
A) Align pre-drilled holes on apron with pre-drilled
holes on bottom panel. Insert 8 large screws
through front, back and side aprons into bottom
panel as shown. Secure each screw with a phillips
head screwdriver.
B) Using a hammer, gently tap in 1 glide onto the
bottom of each leg.
Made in Denmark R03
Page 2 of 6
B
A
C
A
B
A
B
NOTE:
Do not over tighten
the cam screws
Customer Service 800.967.6696 | www.crateandbarrel.com