Assembly Instruction

MADISON LARGE BUFFET
A) Attach 2 door hinges to 4 door panels with 2
small screws per hinge. Secure all screws with a
phillips head screwdriver.
B) Adhere 1 adhesive pad to top corner of each door
panel opposite of case hinge, as illustrated above.
12
Position 4 support wedges onto the back edges of
the assembled unit as shown. Secure each support
wedge with 1 small screw.
11
Made in Denmark R04
Page 4 of 6
10
Carefully position top panel over assembled unit.
Align cam screws and wood dowels with
corresponding holes in the top, middle and side
panels. Make sure the door stops face the front of
the assembled unit.
A
B
Customer Service 800.967.6696 | www.crateandbarrel.com
9
A) Slide 2 large and 2 small back panels into
grooves at rear of side panels and middle partitions as
shown.
B) Slide panel connector between 2 large back
panels.
A
A
B
Large
Back
Panel
Smallr
Back
Panel
Smallr
Back
Panel
Large
Back
Panel