MADISON LARGE BUFFET HARDWARE Thank you for purchasing the Madison Large Buffet. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
MADISON LARGE BUFFET NOTE: Do not over tighten the cam screws B A A C B 1 A. Insert 1 cam screw per leg and tighten with a phillips head screwdriver. B. Insert 2 wood dowels into the ends of each long apron. C. Insert 2 cams into the face of each long apron. Make sure the arrow on each cam points to the closest short end of the the apron. 2 A. Fit 1 leg on the end of each long apron, aligning dowels and cam screws with corresponding holes. B.
MADISON LARGE BUFFET C B B A B Top Panel A A 5 A) Attach metal disk to leg assembly with 3 medium screws as shown. Secure with Phillips head screwdriver. B) Attach support leg into assembly as shown. Turn leg clockwise to secure. C) Gently tap 1 glide into bottom of the support leg with a hammer. 6 A) Position assembled unit upright. Insert 8 cam screws to the bottom panel as illustrated. Secure with a phillips head screwdriver. B) Attach 8 cam screws and 3 door stops to the underside of top panel.
MADISON LARGE BUFFET B Large Back Panel Small r Back Panel Small r Back Panel Large Back Panel A A 9 A) Slide 2 large and 2 small back panels into grooves at rear of side panels and middle partitions as shown. B) Slide panel connector between 2 large back panels. 10 Carefully position top panel over assembled unit. Align cam screws and wood dowels with corresponding holes in the top, middle and side panels. Make sure the door stops face the front of the assembled unit.
MADISON LARGE BUFFET B A B A 13 A) Attach 4 door panels to assembled unit. Fit each door hinge into corresponding case hinge and secure by tightening preinstalled screws in case hinge with a screwdriver. Hinges are adjustable to help align the doors. Refer to page 6 for adjustment instructions. B) Insert shelf pins into side panels and middle partitions at desired shelf height (adjustable). 14 A) Fit 1 large shelf and 2 small shelves into case and onto shelf pins.
MADISON LARGE BUFFET HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated. A B 1 1) Side to side adjustment: Loosen screw A, adjust gap with screw B and re-tighten screw A. A B 2 2) Depth adjustment: Loosen screw A, push hinge arm forwards or backwards, re-tighten screw A and secure screw B with a 1/4 turn clockwise.
MADISON LARGE HUTCH ASSEMBLY HARDWARE 34 - wood dowels 12 - small screws Thank you for purchasing the Madison Large Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
MADISON LARGE HUTCH NOTE: Make sure arrows on each cam point towards nearest edge with holes A bottom back panel A B left and right side panels B bottom panel 1 A) Insert 4 cam screws and 3 wood dowels into left and right side panels as shown. Secure cam screws with a phillips head screwdriver. B) Position each hinge plate over corresponding holes in side panels. Secure hinges with pre-attached bolts, using a screwdriver. 2 A) Insert 4 cams and 4 wood dowels into bottom back panel as shown.
MADISON LARGE HUTCH B partition BACK VIEW OF ASSEMBLED UNIT A felt 5 A) Adhere felt along bottom edge of assembled unit as shown. B) Fit dowels of partitions into corresponding holes of assembled unit as shown. 6 Secure bottom panel to assembled unit with 6 connecting bolts as shown, using an allen wrench.
MADISON LARGE HUTCH small adjustable shelf large adjustable shelf large adjustable shelf A A B small adjustable shelf 9 Secure top panel to assembled unit with 10 connecting bolts as shown. 10 A) Insert 16 shelf pins at desired shelf heights as shown. B) Place 2 small adjustable shelves and 2 large adjustable shelves into assembled unit. Make sure each shelf is securely supported by shelf pins.
MADISON LARGE HUTCH 13 With the assistance of another adult, carefully place hutch on top of buffet as shown. Attach 4 connecting brackets to back of hutch/buffet assembly with 2 large screws per bracket as shown. Secure screws with a screwdriver. Assembly is now complete. hutch buffet (sold separately) HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
MADISON LARGE HUTCH SIDE VIEW cabinet screw flat washer wall wall strap flat washer wall anchor appropriate to wall type wall screw appropriate to wall type NOTE: Insert screws 3/4"-1" from the edge of the strap WALL MOUNTING ASSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors made for your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
