Assembly Instruction

MADISON CABINET
Made in Denmark - r06 Page 6 of 6
Customer Service 800.967.6696 | www.crateandbarrel.com
WALL MOUNTING ASSEMBLY
For added safety and stability, it is recommended
that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors
made for your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever
possible.
The included hardware is used for attaching wall
strap to unit only. You will need to purchase the
appropriate screw and anchor for your wall type.
NOTE: If you are unsure about your wall type or
what mounting method you should use, consult
a qualified professional or your local hardware
store.
A. Drill a hole in the wall slightly smaller
than the diameter of the wall anchor (not
included). Lightly tap with a hammer until
the face is flush with the wall.
B. Insert 1 wall screw (not included) and 1
flat washer through wall strap and into
the wall anchor.
C. Insert 1 cabinet screw and 1 flat
washer through wall anchor strap and into
the top of unit.
NOTE: Insert screws 3/4"-1"
from the edge of the strap
cabinet
screw
wall
strap
wall anchor
appropriate
to wall type
wall
wall screw
appropriate
to wall type
SIDE VIEW
flat
washer
flat
washer