Assembly Instruction

Customer Service 800.967.6696 | www.crateandbarrel.com
MADISON CABINET
Made in Denmark - r06 Page 3 of 6
5 A) Insert 4 shelf cams into fixed shelf as shown. Make sure
open end of each cam is towards nearest panel edge.
B) Insert 2 shelf screws and 6 large wood dowels into left and
right side panels as shown. Secure cam screws with a screwdriver.
C) Attach 6 hinge plates to left and right side panels as shown.
With a screwdriver, secure hinge plates with pre-attached bolts.
8 Fit dowels of assembled unit into corresponding holes of
top panel as shown. Attach top panel to assembled unit
with 4 connecting bolts as shown.
fixed
shelf
5 Fit shelf screws of left and right side panels into
corresponding shelf cams of fixed shelf as shown. With
a screwdriver, turn pre-attached bolts of shelf cams
clockwise until each cam screw is secure.
left and
right side
panels
A
B
left side
panel
right side
panel
fixed
shelf
top
panel
leg
assembly
C
back
panel
panel
connector
bottom
panel
A
B
7 A) Fit dowels of assembled unit into corresponding holes
of leg assembly as shown. Attach leg assembly to
assembled unit with 8 large screws as shown. Secure bolts
with a screwdriver.
B) Slide back panels and panel connector into grooves of
left and right side panels as shown.
NOTE: Make sure
open end of each cam
is towards nearest
panel edge
6 Fit dowels of assembled unit into corresponding
holes of bottom panel as shown. Attach bottom panel
with 4 connecting bolts as shown. Secure bolts with
an allen wrench.