Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Madison Cabinet

HARDWARE PACK 1

TOOLS REQUIRED

COMPONENTS

HARDWARE PACK 2

HARDWARE PACK 3 HARDWARE PACK 4

1 - wall

anchor strap

1 - cabinet

screw

2 - flat

washers

Made in Denmark - r06 Page 1 of 6

Thank you for purchasing the Madison Cabinet. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

MADISON CABINET

Missing hardware? Please call

800.606.6387 for replacements.

16 - large

wood

dowels

2 - side panels

(1 left, 1 right)

1 - top panel 3 - adjustable

shelves

1 - fixed shelf

1 - bottom

panel

2 - door frames

2 - door fronts

2 - back

panels

2 - short

aprons

2 - long

aprons

4 - legs

8 - cams 8 - cam

screws

8 - connecting

bolts

8 - small

screws

8 - large

screws

4 - glides

12 - shelf

pins

8 - bumpers 8 - hinges

4 - shelf

cams

4 - shelf

screws

12 - small

wood

dowels

20 - nails 8 - hinge

plates

8 - support

wedges

1 - panel

connector

phillips head

screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

allen wrench

4 - pulls

hammer

24 - small

screws

Summary of content (6 pages)

PAGE 1
MADISON CABINET HARDWARE PACK 1 12 - small wood dowels 12 - shelf pins Missing hardware? Please call 800.606.6387 for replacements. 4 - shelf cams 4 - shelf screws 8 - connecting bolts 20 - nails 8 - support 8 - bumpers 8 - hinges 8 - hinge 24 - small wedges plates screws HARDWARE PACK 2 16 - large 8 - cams Thank you for purchasing the Madison Cabinet. This wood page lists all the contents included in the box.
PAGE 2
MADISON CABINET NOTE: Make sure arrows on each cam point towards nearest edge with holes leg glide B A A long apron leg B long apron 1 A) Insert 2 cam screws into 4 legs as shown. Secure cam screws with a phillips head screwdriver. B) Insert 2 cams and 4 large wood dowels into 2 long aprons as shown. Make sure arrows on each cam point towards nearest edge with holes. A 2 A) Fit dowels of long aprons into corresponding holes of legs as shown.
PAGE 3
MADISON CABINET right side panel fixed shelf bottom panel left side panel 5 Fit shelf screws of left and right side panels into corresponding shelf cams of fixed shelf as shown. With a screwdriver, turn pre-attached bolts of shelf cams clockwise until each cam screw is secure. B panel connector 6 Fit dowels of assembled unit into corresponding holes of bottom panel as shown. Attach bottom panel with 4 connecting bolts as shown. Secure bolts with an allen wrench.
PAGE 4
MADISON CABINET NOTE: Hardware pack includes 20 nails. Securing back panel with more than 9 nails is optional. A door frame 90º A C A B B NOTE: Make sure corners of assembled unit are 90º square door front B 9 A) With the assistance of another adult, carefully position unit upright. Make sure corners of assembled unit are 90º square before inserting 9 nails along groove of back panel as shown. Secure nails with a hammer.
PAGE 5
MADISON CABINET A A CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. B adjustable shelves 13 A) Insert 12 shelf pins at desired shelf heights as shown. B) Place 3 adjustable shelves into assembled unit. Make sure each shelf is securely supported by shelf pins. Assembly is now complete.
PAGE 6
MADISON CABINET SIDE VIEW cabinet screw flat washer wall wall strap flat washer wall anchor appropriate to wall type wall screw appropriate to wall type NOTE: Insert screws 3/4"-1" from the edge of the strap WALL MOUNTING ASSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors made for your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.