Assembly Instruction

Made in China r08 Page 3 of 4
7 Fit top panel onto dowels of the assembly and secure
each cam with a phillips head screwdriver.
8 Slide left and right drawer sides up into slots on back of
the drawer front. Make sure glide hardware is on the outside
of the drawer sides and the vertical slots are at the back of
the assembly as shown.
LOOP 3 DRAWER CHEST
5 Fit cam screws of right side panel into corresponding
holes in the back panel and crossbar. Secure each cam with
a phillips head screwdriver.
6 Insert 9 cam screws into the underside of the top panel
as shown.
Customer Service 800.967.6696 | www.crateandbarrel.com