Assembly Instruction

Made in China r08 Page 2 of 4
3 With the assistance of another adult, carefully align
dowels of back panel and crossbar with cam screws of left
side frame and firmly fit into position.
4 Secure 4 cams at the base of the back panel and cross-
bar with a phillips head screwdriver. Turn each cam clock-
wise until it securely engages each cam screw.
LOOP 3 DRAWER CHEST
1 A) Place left side panel face down on a padded surface.
Insert 4 cam screws into the holes as shown. Secure, but do
not over tighten with a phillips head screwdriver.
B) Insert 3 cams into the large holes as shown, making sure
the arrow on each cam points towards the nearest edge with
holes.
C) Insert 2 wood dowels into the top edge of the panel.
Repeat Steps A, B & C for the right side panel.
2 A) Insert 6 wood dowels and 9 cams into back panel as
shown.
B) Insert 2 wood dowels and 2 cams into crossbar as shown.
Back Panel
Crossbar
Arrow on each
cam points towards
edge with holes
A
B
Cam in
unlocked
position
Cam in
locked
position
A
B
C
Customer Service 800.967.6696 | www.crateandbarrel.com