Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Loop Three-Drawer Chest

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China r08 Page 1 of 4

Thank you for purchasing the Loop 3 Drawer Chest.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

NOTE: 2 people are required to safely assemble this

product.

LOOP 3 DRAWER CHEST

Missing hardware? Please call 800.606.6387 for replacements.

17 - cam

screws

6- silver

screws

9 - black

screws

12 - wood

dowels

17 - cam

covers

17 - cams

3 - pulls

12 - glide

screws

Phillips Head Screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - top panel

2 - side frames

(1 left, 1 right)

1 - crossbar

3 - drawer fronts

1 - back panel

3 - drawer backs

6 - drawer sides

(3 right , 3 left)

3 - drawer bottoms

Summary of content (4 pages)

PAGE 1
LOOP 3 DRAWER CHEST HARDWARE 17 - cams 12 - wood dowels Thank you for purchasing the Loop 3 Drawer Chest. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. NOTE: 2 people are required to safely assemble this product.
PAGE 2
LOOP 3 DRAWER CHEST Arrow on each cam points towards edge with holes A B A C 1 A) Place left side panel face down on a padded surface. Insert 4 cam screws into the holes as shown. Secure, but do not over tighten with a phillips head screwdriver. B) Insert 3 cams into the large holes as shown, making sure the arrow on each cam points towards the nearest edge with holes. C) Insert 2 wood dowels into the top edge of the panel. Repeat Steps A, B & C for the right side panel.
PAGE 3
LOOP 3 DRAWER CHEST 5 Fit cam screws of right side panel into corresponding holes in the back panel and crossbar. Secure each cam with a phillips head screwdriver. 7 Fit top panel onto dowels of the assembly and secure each cam with a phillips head screwdriver. Made in China r08 6 Insert 9 cam screws into the underside of the top panel as shown. 8 Slide left and right drawer sides up into slots on back of the drawer front.
PAGE 4
LOOP 3 DRAWER CHEST These holes at back 9 Slide drawer back into vertical slots at rear of drawer sides. 10 Slide drawer bottom into slot at base of drawer sides and drawer front. Make sure pilot holes are at the back of the drawer bottom as shown. B C B A A 11 A) Secure underside of drawer bottom to drawer back with 3 black screws. Secure, but do not over tighten with the phillips head screwdriver. B) Fit drawer pull into position as shown and secure with 2 silver screws.