Assembly Instruction

Made in China r11 Page 4 of 5
LOOP 6 DRAWER DRESSER
9 Insert 13 cam screws into the underside of the top panel
as shown.
10 With assistance of another adult, position assembled
unit upright. Fit cam screws of top panel into corresponding
holes of assembled unit as shown. Secure all cams with a
Phillips head screwdriver.
12 Slide drawer back into vertical slots at rear of drawer
sides.
11 Slide left and right drawer sides up into slots on back
of the drawer front. Make sure glide hardware is on the
outside of the drawer sides and the vertical slots are at the
back of the assembly as shown.
Customer Service 800.967.6696 | www.crateandbarrel.com
top
panel
top
panel