Assembly Instruction

Made in China r11 Page 3 of 5
7 Fit cam screw of right side panel into corresponding hole
of crossbar. Secure cam with a Phillips head screwdriver.
8 Fit cam screws of left side panel into corresponding
holes of back panel and crossbar. Secure cams with a
Phillips head screwdriver.
LOOP 6 DRAWER DRESSER
5 Secure 3 cams at the base of the middle partition with a
Phillips head screwdriver. Turn each cam clockwise until it
securely engages each cam screw.
7 Fit cam screws of right side panel into corresponding
holes of back panel and crossbar. Secure cams with a
Phillips head screwdriver.
Cam in
unlocked
position
middle
partition
6 Carefully turn the middle partition and back panel
assembly on end as shown. Fit dowel of middle partition
into corresponding hole of crossbar. Secure crossbar with 1
black screw as shown, using a Phillips head screwdriver.
crossbar
middle
partition
right side
panel
left side
panel
Customer Service 800.967.6696 | www.crateandbarrel.com