Assembly Instruction

LOOP QUEEN AND KING BED

1 With the assistance of another adult, stand headboard

upright. Fit the tabs of the left and right side rails down into

the corresponding slots in the headboard hardware. Firmly

press down on side rails until they securely lock in place.

Made in China r03

Page 1 of 2

Thank you for purchasing the Loop Queen and King

Bed. This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

HARDWARE

COMPONENTS

1 - footboard

1 - headboard

1 - center rail

12 - short

screws

2 - long

screws

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

2 - side rails

(1 left, 1 right)

2 - support legs

2 - slat rolls

PAGE 1
LOOP QUEEN AND KING BED HARDWARE 2 - long screws 12 - short screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Loop Queen and King Bed. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
LOOP QUEEN AND KING BED A B 2 Fit metal tabs of side rails into corresponding slots in footboard. Firmly lock each rail into position. 3 A) Attach 2 support legs to the underside of the center rail with 2 long screws. Secure, but do not over tighten with a phillips head screwdriver. B) Firmly fit metal brackets of the center rail into corresponding brackets in the head and footboards. 4 A. Unroll slat rolls and lay across the center rails and side rails as shown, making sure slats bow upwards.