Assembly Instruction

LOOP HUTCH
Made in China - r05 Page 4 of 4
9 With the assistance of another adult, carefully
place hutch onto file cabinet as shown. Attach 2
brackets to back of assembled unit with 4
bracket screws per bracket as shown. Secure
screws with a screwdriver.
Assembly is now complete.
hutch
file
cabinet
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a protective clear lacquer.
Customer Service 800.967.6696 | www.crateandbarrel.com
small
screw
wall
strap
large
screw
plastic
anchor
WALL
10 Safety Mounting Instructions
A. Drill a hole in the wall slightly
smaller than the diameter of the
plastic wall anchor. Lightly tap
with a hammer until the face is
flush with the wall.
B. Insert large screw through
wall anchor strap and into the
wall anchor.
C. Insert small screw through
wall anchor strap and into the top
of unit.
Mounting assembly is now
complete.
NOTE: Insert screws 3/4"-1"
from the edge of the strap
NOTE:
If you are unsure about your
wall type or what mounting
method you should use, consult
a qualified professional or your
local hardware store.