Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Loop Hutch Top

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r05 Page 1 of 4

Thank you for purchasing the Loop Hutch. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LOOP HUTCH

Missing hardware? Please call 800.606.6387 for replacements.

14 - wood

dowels

14 - cams

14 - cam

screws

8 - bracket

screws

4 - shelf

pins

14 - cam

covers

2 - brackets

1 - plastic

anchor

1 - large

screw

1 - wall

strap

1 - small

screw

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

2 - side frames

(1 left, 1 right)

1 - top

panel

1 - adjustable

shelf

1 - fixed

shelf

1 - back panel

Summary of content (4 pages)

PAGE 1
LOOP HUTCH HARDWARE 14 - cam covers 14 - wood dowels 14 - cams 14 - cam screws 8 - bracket screws 4 - shelf pins 2 - brackets 1 - plastic anchor 1 - wall strap Thank you for purchasing the Loop Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
LOOP HUTCH A NOTE: Make sure arrows on each cam points towards nearest edge with holes. left and right side panels B left side panel back panel back panel 1 A) Insert 2 wood dowels, 5 cam screws and 2 cams into left and right side panels as shown. Make sure arrows on each cam points towards nearest edge with holes. Secure cam screws with a phillips head screwdriver. B) Insert 6 wood dowels and 6 cams into back panel as shown.
PAGE 3
LOOP HUTCH top panel right side panel 5 Fit dowels of assembled unit into corresponding holes of right side panel as shown. Secure 5 cams. 6 Insert 4 cam screws into underside of top panel as shown. top panel A A B adjustable shelf 7 With the assistance of another adult, carefully position unit upright as shown. Fit dowels of assembled unit into corresponding holes of top panel as shown. Secure 4 cams, and cover exposed cams with cam covers.
PAGE 4
LOOP HUTCH hutch 9 With the assistance of another adult, carefully place hutch onto file cabinet as shown. Attach 2 brackets to back of assembled unit with 4 bracket screws per bracket as shown. Secure screws with a screwdriver. Assembly is now complete. file cabinet WALL 10 Safety Mounting Instructions A. Drill a hole in the wall slightly smaller than the diameter of the plastic wall anchor. Lightly tap with a hammer until the face is flush with the wall. B.