Assembly Instruction

LOOP FULL BED
2 Fit metal tabs of side rails into corresponding slots in
footboard. Firmly lock each rail into position.
4 Place slat rolls onto center and side rails as shown. Unroll
each slat roll, making sure slats bow upwards.
3 A) Attach 1 support leg to the underside of the center rail
with 1 long screw. Secure, but do not over tighten with a
phillips head screwdriver.
B) Firmly fit metal brackets of the center rail into corresponding
brackets in the head and footboards.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
5 Attach slats to center and side rails with 12 short screws
as shown. Secure each screw with a phillips head
screwdriver.
Assembly is now complete.
Note:
Make sure slats
bow upwards
A
B
Made in China r01
Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com