Assembly Instruction

LOOP FULL BED

1 With the assistance of another adult, stand headboard

upright. Fit the tabs of the left and right side rails down into

the corresponding slots in the headboard hardware. Firmly

press down on side rails until they securely lock in place.

Made in China r01

Page 1 of 2

Thank you for purchasing the Loop Full Bed. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

HARDWARE

COMPONENTS

1 - footboard

1 - headboard

1 - center rail

12 - short

screws

1 - long

screw

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

2 - side rails

(1 left, 1 right)

1 - support leg

2 - slat rolls

PAGE 1
LOOP FULL BED HARDWARE 1 - long screw 12 - short screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Loop Full Bed. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
LOOP FULL BED A B 2 Fit metal tabs of side rails into corresponding slots in footboard. Firmly lock each rail into position. 3 A) Attach 1 support leg to the underside of the center rail with 1 long screw. Secure, but do not over tighten with a phillips head screwdriver. B) Firmly fit metal brackets of the center rail into corresponding brackets in the head and footboards. Note: Make sure slats bow upwards 5 Attach slats to center and side rails with 12 short screws as shown.