Assembly Instruction

LOOP FLOOR MIRROR
5 With assistance, place the mirror upright. Conceal all
exposed cams with plastic cam covers. Assembly is now
complete.
4 With the assistance of another adult, place mirror frame
face down on a clean, padded surface. Position side panel
assembly as shown, and fit onto cam screws of mirror frame.
Secure all 8 cams with a phillips head screwdriver.
Made in China r06
Page 2 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
2 A) Insert 2 cam screws into each side panel as shown.
Secure, but do not over tighten with a phillips head
screwdriver.
B) Attach 8 cam screws to the mirror frame as shown.
A
B
3 Fit side panels onto base panel as shown, aligning dowels
and cam screws with corresponding holes in base panel.
Secure all 4 cams by turning clockwise with a phillips head
screwdriver until each cam securely engages each cam screw.
NOTE:
Do not over tighten the cam screws
Cam in
unlocked
position
Cam in
locked
position
SIDE VIEW
*NOTE: Make sure tapered edge of the
base panel fits against the mirror frame.
side panels
base panel*
cams