Assembly Instruction

LOOP DESK
Made in China - r08 Page 3 of 3
drawer
3 With the assistance of another adult, carefully position unit
upright. Attach 2 pulls to drawer front with 2 screws per pull.
Secure screws, but do not over tighten, with a screwdriver.
Assembly is now complete.
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
pull
NOTE: Do not over
tighten the screws
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
B
A
REMOVING DRAWER ASSEMBLY
A) Remove drawer assembly from desk:
Fully extend drawer assembly from desk. Locate plastic tabs on
left and right drawer glides. With even pressure, simutaneously
lift the left tab (A) and press the right tab (B) to release drawer
assembly from assembled unit.
B) Attach drawer assembly to desk:
Fully extend drawer glides from desk. Fit drawer glides of
drawer assembly into corresponding drawer glides of file
cabinet. Push drawer assembly forward and listen for a click to
ensure that assembly is secure.
left drawer
glide
right drawer
glide