Assembly Instruction

Made in China r08 Page 3 of 3
7 A) Attach 3 hinges to the top panel with 3 large screws
per hinge. Secure with the phillips head screwdriver.
B) With the assistance of another adult attach hinges of top
panel to assembly with 3 large screws per hinge.
8 A) With the assistance of another adult, lift top panel
open as shown. Attach top of left and right lid supports to
top panel with 2 small screws per support.
B) Remove backing from 4 bumpers and adhere onto the
underside of top panel as shown. When top panel is closed,
make sure the bumpers rest on the top edge of the front
panel.
Assembly is now complete.
LOOP STORAGE BENCH
5 A) With the assistance of another adult, carefully turn
case assembly right side up and fit right and left side
frames onto assembly. Secure all 8 cams on the front and
back panel with a phillips head screwdriver.
B) Conceal all exposed cams with cam covers.
6 Attach left and right lid supports to the inside of each
side frame with 2 small screw per support as shown. Secure,
but do not over tighten with the phillips head screwdriver.
A
B
A
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A
B
Customer Service 800.967.6696 | www.crateandbarrel.com
NOTE: When attaching the left
and right lid supports, make
sure it bends towards the
front of the cabinet.