Assembly Instruction

Made in China - r09 Page 3 of 4
5 A) Insert 4 cams into bottom panel assembly as
shown. Make sure arrows on each cam points towards
nearest edge with holes.
B) Fit dowels of back panel into corresponding holes of
bottom panel assembly as shown. Turn each cam
clockwise to secure with a phillips head screwdriver.
Make sure each cam securely engages each cam screw.
LOOP MEDIA STAND
6 A) Position unit face up as shown. Insert 4 cams into
bottom panel as shown. Fit left and right side panels onto
assembled unit as shown. Secure all cams.
B) Attach support leg to assembled unit as shown. Turn leg
clockwise to secure.
8 A) Insert 8 shelf pins into assembled unit at desired
shelf heights. Press firmly to secure.
B) Place 2 adjustable shelves into assembled unit as
shown. Make sure shelves are securely supported by
each shelf pin.
B
A
A
7 A) With the assistance of another adult, carefully position
unit upright. Carefully fit top panel onto assembled unit as
shown. Secure all cams.
B) Conceal all exposed cams with cam covers.
B
A
A
bottom
panel
A
B
A
A
B
B
bottom
panel
assembly
back
panel
Customer Service 800.967.6696 | www.crateandbarrel.com