Assembly Instruction

Made in China - r09 Page 2 of 4
1 Insert 4 cam screws, 2 cams, and 2 wood dowels
into each side panel as shown. Make sure arrows on
each cam points toward nearest edge with holes.
Secure cam screws with a phillips head screwdriver.
LOOP MEDIA STAND
2 A) Insert 4 cams and 4 wood dowels into middle panel as
shown.
B) Insert 2 cam screws and 4 wood dowels into bottom
panel as shown.
3 A) Insert 8 cams, 4 cam screws and 12 wood
dowels into back panel as shown.
B) Insert 10 cams screws into top panel as shown.
4 Place bottom panel onto a clean, padded surface,
and fit middle panel onto cam screws of bottom panel
as shown. With a screwdriver, turn each cam clock-
wise until it securely engages each cam screw.
left side
panel
right side
panel
Make sure arrows on each
cam points toward nearest
edge with holes
middle
panel
bottom
panel
bottom
panel
middle
panel
Customer Service 800.967.6696 | www.crateandbarrel.com
A
B
top
panel
B
back
panel
A