Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Loop 54" Media Stand

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r09 Page 1 of 4

Thank you for purchasing the Loop Media Stand. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LOOP MEDIA STAND

Missing hardware?

Please call 800.606.6387

for replacements.

24 - cams

24 - cam

screws

24 - cam

covers

8 - shelf

pins

24 - wood

dowels

2 - side panels

(1 left, 1 right)

2 - doors

(1 left, 1 right)

1 - middle panel

1 - top panel

2 - adjustable

shelves

1 - back panel 1 - bottom panel

1 - support

leg

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
LOOP MEDIA STAND HARDWARE 24 - cams 8 - shelf pins Thank you for purchasing the Loop Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
LOOP MEDIA STAND right side panel A middle panel Make sure arrows on each cam points toward nearest edge with holes left side panel B 1 Insert 4 cam screws, 2 cams, and 2 wood dowels into each side panel as shown. Make sure arrows on each cam points toward nearest edge with holes. Secure cam screws with a phillips head screwdriver. A bottom panel 2 A) Insert 4 cams and 4 wood dowels into middle panel as shown. B) Insert 2 cam screws and 4 wood dowels into bottom panel as shown.
PAGE 3
LOOP MEDIA STAND A B A A back panel bottom panel assembly B 5 A) Insert 4 cams into bottom panel assembly as shown. Make sure arrows on each cam points towards nearest edge with holes. B) Fit dowels of back panel into corresponding holes of bottom panel assembly as shown. Turn each cam clockwise to secure with a phillips head screwdriver. Make sure each cam securely engages each cam screw. B bottom panel 6 A) Position unit face up as shown. Insert 4 cams into bottom panel as shown.
PAGE 4
LOOP MEDIA STAND NOTE: Press the pins on top of the doors down to install doors. Press the buttons on the back to release the pins and lock the doors into place. right side door left side door front groove of bottom panel back groove of bottom panel 9 Attach left door to assembled unit as shown. Carefully insert wheels of left door into back groove of bottom panel. Press down the two levers and line up with the back groove of top panel. Use the buttons to release levers to secure door.