Assembly Instruction

Made in China - r07 Page 4 of 4
9 Attach left door to assembled unit as shown.
Carefully insert wheels of left door into back groove of
bottom panel. Press down the two levers and line up
with the back groove of top panel. Use the buttons to
release levers to secure door. Repeat steps for right
door, inserting door into the front grooves instead of
the back.
Assembly is now complete.
LOOP MEDIA STAND
left side
door
right side
door
back groove of bottom panel
front groove of bottom panel
NOTE:
Press the pins on top of
the doors down to install doors.
Press the buttons on the back
to release the pins and lock
the doors into place.
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Once the top rollers are engaged,
adjust the wheel height to secure
and level the doors
Push this button down to
remove door
A
B
B
A
A. If the doors are not operating smoothly, push the buttons
down on the back doors to remove them from the unit as
shown. Ensure that the buttons are locked in the down position
and install the doors again making sure that the wheels on the
bottom are aligned with the correct track on the bottom panel.
Now pivot the door into place ensuring that the pins are
inserted correctly into the tracks in the top panel.
B. To level the door, adjust the wheel height as shown above.