Assembly Instruction

Made in China - r07 Page 3 of 4
5 A. Insert 4 cams into bottom panel assembly as
shown. Make sure arrows on each cam points
towards nearest edge with holes.
B. Fit holes of back panel to cam screws of
assembled unit as shown. Turn each cam clockwise
to secure with a phillips head screwdriver. Make
sure each cam securely engages each cam screw.
LOOP MEDIA STAND
6 A. Position unit face up as shown. Insert 4 cams into
bottom panel as shown. Fit left and right side panels onto
assembled unit as shown. Secure all cams.
B. Attach support leg to assembled unit as shown. Turn leg
clockwise to secure.
8 A) Insert 8 shelf pins into assembled unit at desired
shelf heights. Press firmly to secure.
B) Place 2 adjustable shelves into assembled unit as
shown. Make sure shelves are securely supported by
each shelf pin.
B
A
A
back
panel
7 A) With the assistance of another adult, carefully position
unit upright. Carefully fit top panel onto assembled unit as
shown. Secure all cams.
B) Conceal all exposed cams with cam covers.
bottom
panel
B
A
A
bottom
panel
A
B
A
A
B
B
bottom
panel
back
panel
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.