Assembly Instruction

LEDGE TWIN BED
Made in Thailand - r02 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 A) Insert 2 wood dowels into left and right side
rails as shown.
B) With assistance of another adult, fit dowels of side
rails into headboard and footboard as shown.
Secure each corner with 2 bolts and 2 washers, using
a hex wrench. Do not over tighten the bolts.
NOTE: Do not over
tighten the bolts
A
headboard
footboard
right side
rail
left side
rail
B
left side
rail
headboard
CLEANING AND CARE
Clean surfaces with a dry or damp
soft cloth. Do not use abrasive cleaners.
Do not use furniture wax or polish as the
wood is finished with a protective clear
lacquer.
2 Attach slat assembly to bed assembly with 6 screws as shown.
Secure, but do not over tighten, screws with a phillips head screw-
driver.
Assembly is now complete.
NOTE: Do not over
tighten the screws
slat
assembly