Assembly Instruction

COMPONENTS

Made in Thailand - r02 Page 1 of 2

Thank you for purchasing the Ledge Twin Bed. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LEDGE TWIN BED

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

4 - wood

dowels

phillips head screwdriver

(We recommened the use of hand tools instead of power tools)

hex wrench (included)

8 - washers 8 - bolts 6 - screws

1 - headboard 1 - footboard

2 - side rails

(1 left, 1 right)

1 - slat assembly

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
LEDGE TWIN BED ASSEMBLY HARDWARE 4 - wood dowels 8 - washers 8 - bolts 6 - screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Ledge Twin Bed. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
LEDGE TWIN BED headboard NOTE: Do not over tighten the bolts headboard left side rail A B left side rail right side rail footboard 1 A) Insert 2 wood dowels into left and right side rails as shown. B) With assistance of another adult, fit dowels of side rails into headboard and footboard as shown. Secure each corner with 2 bolts and 2 washers, using a hex wrench. Do not over tighten the bolts.