Assembly Instruction

LEDGE NIGHTSTAND
Made in Malaysia - r06 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
3 Position base assembly as shown. Fit dowels of left
and right side panels into corresponding holes of bottom
panel as shown. Secure left and right side panels with 3
large bolts per side, using an allen wrench. Do not over
tighten the bolts.
NOTE: Do not over
tighten the bolts
right
side
panel
left
side
panel
left and right
side panels
1 Place left and right side panels onto a clean, padded
surface. Insert 6 wood dowels into left and right side
panels as shown.
2 A) Attach base assembly to bottom panel with 8
large screws as shown. Secure, but do not over
tighten, screws using a phillips head screwdriver.
B) Adhere 4 adhesive feet to legs as shown.
base
NOTE: Do not over
tighten screws
bottom panel
4 Fit dowels of left and right side panels into
corresponding holes of top panel as shown. Secure
left and right side panels with 3 small bolts per side
as shown, using an allen wrench.
top panel
NOTE: Allen wrench
can be held at an angle
to allow for full rotation
when securing bolts
NOTE: Allen wrench
can be held at an angle
to allow for full rotation
when securing bolts
adhesive
foot
A
B