Assembly Instruction
LEDGE CHIFFONIER
Made in Malaysia - r08 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 Attach drawer left side panel to drawer back and
drawer front with 4 drawer screws as shown, using a
screwdriver.
drawer
front
drawer
back
NOTE: Make sure grooves
of top drawer left side panel,
back and front are assembled
as shown
drawer left
side panel
7 Attach back panel to assembled unit with 16 small
screws as shown, using a screwdriver.
back panel
5 Position base assembly as shown. With the assistance
of another adult, fit dowels of left and right side panels
into corresponding holes of bottom panel as shown.
Secure left and right side panels with 3 large bolts per
side, using an allen wrench. Do not over tighten the bolts.
NOTE: Do not over
tighten the bolts
right
side
panel
left side
panel
6 Fit dowels of left and right side panels into
corresponding holes of top panel as shown. Secure
left and right side panels with 3 small bolts per side
as shown, using an allen wrench.
top panel
NOTE: Allen wrench can be
heldat an angle to allow for
full rotation when securing
bolts
NOTE: Allen wrench can be
heldat an angle to allow for
full rotation when securing
bolts