Assembly Instruction
LEDGE 6 DRAWER DRESSER
Made in Malaysia - r10 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 Attach top drawer left side panel to top drawer back
and top drawer front with 4 drawer screws as shown,
using a screwdriver.
top drawer
front
top drawer
back
NOTE: Make sure grooves
of top drawer left side panel,
back and front are assembled
as shown
top drawer
left side panel
7 Attach 2 back panels to assembled unit with 24
small screws as shown, using a screwdriver.
5 A) Position base assembly as shown. Fit dowels of left
and right side panels into corresponding holes of bottom
panel as shown. Secure left and right side panels with 3
large bolts per side, using an allen wrench. Do not over
tighten the bolts.
B) Attach partition to bottom panel with 2 large bolts as
shown.
NOTE: Do not over
tighten the bolts
right
side
panel
left side
panel
B
partition
6 A) Fit dowels of left and right side panels into corre-
sponding holes of top panel as shown. Secure left and
right side panels with 3 small bolts per side as shown,
using an allen wrench.
B) Secure partition to top panel with 2 small bolts as
shown.
top panel
A
B
back panel
back panel
NOTE: Allen wrench can be heldat an
angle to allow for full rotation when
securing bolts
NOTE: Allen wrench can be
heldat an angle to allow for
full rotation when securing
bolts