Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Ledge 6-Drawer Dresser

COMPONENTS

Made in Malaysia - r10 Page 1 of 4

Thank you for purchasing the Ledge 6 Drawer Dresser.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LEDGE 6 DRAWER DRESSER

2 - top

drawer backs

1 - top panel 1 - base

4 - bottom

drawer fronts

2 - side panels

(1 left, 1 right)

2 - back panels

2 - top

drawer fronts

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

24 - wood

dowels

8 - small

bolts

8 - large

bolts

phillips head screwdriver

1 - bottom

panel

24 - small

screws

(We recommend the use of hand tools instead power tools)

allen wrench (included)

4 - bottom

drawer backs

48 - drawer

screws

12 - large

screws

5 - adhesive

feet

4 - top drawer

side panels

(2 left, 2 right)

8 - bottom drawer

side panels

(4 left, 4 right)

6 - drawer bottoms

1 - partition

1 - support

leg

8 - cam

screws

8 - cams

2 - back crossbars

(1 left, 1 right)

2 - front crossbars

(1 left, 1 right)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
LEDGE 6 DRAWER DRESSER ASSEMBLY HARDWARE 8 - small bolts 8 - large bolts 48 - drawer screws 24 - wood dowels 8 - cam screws 8 - cams 24 - small screws 12 - large screws 5 - adhesive feet Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Ledge 6 Drawer Dresser. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
LEDGE 6 DRAWER DRESSER B NOTE: Do not over tighten the cam screw NOTE: Do not over tighten screws B support leg adhesive foot left and right side panels A A base partition C 1 A) Place left and right side panels onto a clean, padded surface. Insert 6 wood dowels into left and right side panels as shown. B) Insert 2 cam screws into left and right side panels as shown. Secure, but do not over tighten, cam screw with a phillips head screwdriver. C) Insert 4 cams into partition as shown.
PAGE 3
LEDGE 6 DRAWER DRESSER left side panel partition right side panel NOTE: Do not over tighten the bolts top panel A B NOTE: Allen wrench can be held at an angle to allow for full rotation when securing bolts B NOTE: Allen wrench can be held at an angle to allow for full rotation when securing bolts 5 A) Position base assembly as shown. Fit dowels of left and right side panels into corresponding holes of bottom panel as shown.
PAGE 4
LEDGE 6 DRAWER DRESSER drawer bottom 9 Fit drawer bottom into grooves of assembled drawer as shown. top drawer right side panel 10 Attach top drawer right side panel to top drawer front and top drawer back with 4 drawer screws as shown. Repeat steps 8-10 for remaining top and bottom drawer assemblies. 11 Fit drawer glides of drawer assemblies into corresponding glides of dresser as shown. Assembly is now complete.