Assembly Instruction
LEDGE 4 DRAWER CHEST
Made in Malaysia - r09 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
8 Attach top drawer left side panel to top drawer back
and top drawer front with 4 drawer screws as shown,
using a screwdriver.
top drawer
front
top drawer
back
NOTE: Make sure grooves
of top drawer left side panel,
back and front are assembled
as shown
top drawer
left side panel
7 Attach back panel to assembled unit with 16 small
screws as shown, using a screwdriver.
back panel
5 Position base assembly as shown. Fit dowels of left
and right side panels into corresponding holes of
bottom panel as shown. Secure left and right side
panels with 3 large bolts per side, using an allen
wrench. Do not over tighten the bolts.
NOTE: Do not over
tighten the bolts
right
side
panel
left
side
panel
6 Fit dowels of left and right side panels into corre-
sponding holes of top panel as shown. Secure left and
right side panels with 3 small bolts per side as
shown, using an allen wrench.
top panel
NOTE: Allen wrench can be
heldat an angle to allow for
full rotation when securing bolts
NOTE: Allen wrench can be
heldat an angle to allow for
full rotation when securing
bolts