Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Ledge 4-Drawer Chest

COMPONENTS

Made in Malaysia - r09 Page 1 of 5

Thank you for purchasing the Ledge 4 Drawer Chest.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LEDGE 4 DRAWER CHEST

1 - top

drawer back

1 - top panel 1 - base

3 - bottom

drawer fronts

2 - side panels

(1 left, 1 right)

1 - back panel

1 - top

drawer front

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

14 - wood

dowels

6 - small

bolts

6 - large

bolts

phillips head screwdriver

1 - bottom

panel

16 - small

screws

(We recommend the use of hand tools instead power tools)

allen wrench (included)

3 - bottom

drawer backs

32 - drawer

screws

10 - large

screws

4 - adhesive

feet

2 - top drawer

side panels

(1 left, 1 right)

6 - bottom drawer

side panels

(3 left, 3 right)

4 - drawer bottoms

1 - crossbar

2 - cam

screws

2 - cams

2 - large

screws

2 - wall

straps

4 - wall

brackets

2 - plastic

anchors

WALL MOUNTING HARDWARE

2 - small

screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (5 pages)

PAGE 1
LEDGE 4 DRAWER CHEST ASSEMBLY HARDWARE 6 - small bolts 6 - large bolts 32 - drawer screws Missing hardware? Please call 800.606.6387 for replacements. 14 - wood dowels 2 - cam screws 16 - small screws 2 - cams 10 - large screws 4 - adhesive feet WALL MOUNTING HARDWARE Thank you for purchasing the Ledge 4 Drawer Chest. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
LEDGE 4 DRAWER CHEST NOTE: Do not over tighten screws NOTE: Do not over tighten the cam screw B left and right side panels adhesive pad B base A A 1 A) Place left and right side panels onto a clean, padded surface. Insert 6 wood dowels into left and right side panels as shown. B) Insert 1 cam screw into left and right side panels as shown. Secure, but do not over tighten, cam screw with a phillips head screwdriver. bottom panel 2 A) Attach base assembly to bottom panel with 10 large screws as shown.
PAGE 3
LEDGE 4 DRAWER CHEST NOTE: Allen wrench can be held at an angle to allow for full rotation when securing bolts left side panel right side panel top panel NOTE: Allen wrench can be held at an angle to allow for full rotation when securing bolts NOTE: Do not over tighten the bolts 5 Position base assembly as shown. Fit dowels of left and right side panels into corresponding holes of bottom panel as shown. Secure left and right side panels with 3 large bolts per side, using an allen wrench.
PAGE 4
LEDGE 4 DRAWER CHEST top drawer right side panel drawer bottom 9 Fit drawer bottom into grooves of assembled drawer as shown. 10 Attach top drawer right side panel to top drawer front and top drawer back with 4 drawer screws as shown. Repeat steps 8-10 for remaining bottom drawer assemblies. top drawer assembly CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
PAGE 5
LEDGE 4 DRAWER CHEST SAFETY MOUNTING INSTRUCTIONS: For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.