Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
Made in China R02
Page 2 of 2
LEANING BOOKCASE
54”
A) Insert wall anchor into the hole.
B) Fasten 1 small screw into the wall anchor
using a Phillips head screwdriver. Leave screw
protruding 1/4" out of the wall, as illustrated above.
3
leave 1/4" out
A
B
B
With assistance of another adult, position assembled
unit upright. Carefully align keyhole on back side of
the second shelf with protruding screw in the wall
and fit securely into place.
Assembly is now complete.
4
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
IMPORTANT NOTE:
The wall mounting
hardware included with
this product is intended
for drywall installation
only. Be sure to use
hardware appropriate
for your wall type.
Whenever possible,
attach mounting
hardware into a wall
stud.
If you are unsure about
your wall type or what
mounting method you
should use, consult a
qualified professional or
your local hardware
store.
2
Drill a 1/4" hole into the wall, 54" from the floor.