Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

LEANING BOOKCASE

1 - left

upright

1 - right

upright

5 - shelves

A) Position right and left uprights with 5 shelves (in

descending depths) as shown. Place the shortest depth

shelf at the top of the uprights, and longest depth shelf

at the bottom.

B) Insert 1 connecting screw through each shelf side,

and secure each screw with the Allen wrench.

TOOLS REQUIRED

Allen wrench (included)

Phillips head screwdriver

Drill and 1/4"drill bit

1 - keyhole (attached to second smallest shelf)

Made in China R02

Page 1 of 2

Thank you for purchasing the Leaning Shelves. This page

lists all the contents included in the box. Please take the time

to identify the hardware as well as the individual components

to this product. As you unpack and prepare for assembly,

place the contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this product.

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

10 - connecting

screws

x10

1 - small

screw

1 - wall anchor

PAGE 1
LEANING BOOKCASE HARDWARE 10 - connecting screws 1 - small screw 1 - wall anchor 1 - keyhole (attached to second smallest shelf) Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Leaning Shelves. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
LEANING BOOKCASE IMPORTANT NOTE: The wall mounting hardware included with this product is intended for drywall installation only. Be sure to use hardware appropriate for your wall type. Whenever possible, attach mounting hardware into a wall stud. If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. A B 54” B leave 1/4" out 2 Drill a 1/4" hole into the wall, 54" from the floor.