Assembly Instruction

LAUNDRYBUTLER
MadeinTaiwan-r02 Page2of 2
CustomerService800.967.6696|Latestinstructionsavailableatwww.crateandbarrel.com
middletube
NOTE:Donotover
tightenthebolts
hangingbar
ASSEMBLY
toptube
bottomtube
frame
basket
shelf
wheel
A
C
D
B
E
K
F
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners.
locking
wheel
wheel
1 A) Attach 2 bumpers, 1 locking wheel and 1
wheel to each bottom tube frame as shown. Turn
each wheel clockwise to secure. Make sure locking
wheel faces front as shown.
B) Attach 1 shelf to 2 bottom tube frames with 4
large bolts as shown. Secure, but do not over
tighten, each bolt using a phillips head screw-
driver.
C) Fit 2 middle tubes into bottom tube frames.
D) Fit 2 top tubes into middle tubes as shown.
Make sure pins of each top tube securely engages
corresponding holes of middle tubes.
E) Fit top tubes of assembly into 1 hanging bar.
Secure with 2 small bolts as shown.
F) Attach 1 basket to bottom tube frames with 2
large bolts and 4 small bolts as shown.
Assembly is now complete.
bumper
locking
wheel
NOTE: Make sure
locking wheels face
front as shown