Assembly Instruction

COMPONENTS

Made in Taiwan - r02 Page 1 of 2

Thank you for purchasing the Laundry Butler. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LAUNDRY BUTLER

1 - basket

2 - middle

tubes

2 - wheels

1 - hanging

bar

TOOLS REQUIRED

6 - small

bolts

6 - large

bolts

2 - locking

wheels

2 - bottom

tube frames

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

HARDWARE

Missing hardware?

Please call 800.606.6387 for replacements.

2 - top

tubes

4 - bumpers

1 - shelf

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
LAUNDRY BUTLER HARDWARE 6 - small bolts 6 - large bolts Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Laundry Butler. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
LAUNDRY BUTLER 1 A) Attach 2 bumpers, 1 locking wheel and 1 wheel to each bottom tube frame as shown. Turn each wheel clockwise to secure. Make sure locking wheel faces front as shown. ASSEMBLY NOTE: Do not over tighten the bolts B) Attach 1 shelf to 2 bottom tube frames with 4 large bolts as shown. Secure, but do not over tighten, each bolt using a phillips head screwdriver. hanging bar E C) Fit 2 middle tubes into bottom tube frames. top tube D) Fit 2 top tubes into middle tubes as shown.